Rotor Prefabricated Part – Magnet Drying Station
The station was designed for transporting rotating parts. To decide when the seats can move on, can be timed on the control panel. The equipment has 3 conveyor chains, providing 2 rows of seats next to each other. The operator inserts the rotor parts into these seats. The period of time between inserting and taking out the same rotor part must be at least 4 hours. The station has the capacity for 576 pieces of rotating parts.
.
The equipment has a feeding part (where the rotor parts can be inserted into the conveyor seats) and the discharging part (where we can take out the rotor parts from the conveyor). The control panel is placed at the feeding part, and is used for setting different operating modes. The station is equipped with emergency buttons and progress lamps at both sides. .
.
The error alert including flashlight, acoustic warning and contact signals are feasible to stop the production line. The error alert is continuous until acknowledgement! After the acknowledgement the error alert ceases. .
.
The operators can not reach into the work area without error alert only if the green lamp lights in front of them. Actually, if the operators reach into the work area protected with safety light curtain, the station stops conveying rotor parts, and they are also warned by beeping.
